-
Why are there shrinkage marks on the surface of products
During the production of injection molded products, some products will have uneven surface shrinkage due to uneven wall thickness, resulting in shrinkage marks. So what is a shrink mark? Shrinkage mark refers to the phenomenon...
Date : 07/01/2022 | View : 985
-
What is anodized coating and its function?
Fist what is anodized coating?
As we all know anodizing is an electrochemical process that converts the metal surface into a decorative,
durable, corrosion-resistant, anodic oxide finish. Aluminum is ideally...
Date : 06/30/2022 | View : 1112
-
Injection mold design and manufacturing solutions
The injection mold structure should be reasonably selected. According to the drawings and technical requirements of the plastic parts, research and select the appropriate molding methods and equipment, combine the mechanical...
Date : 06/29/2022 | View : 1032
-
The reason and solutions of defective injection products -- warp
1. Unbalanced molecular orientation. The warping deformation of thermoplastics largely depends on the difference between the radial and tangential shrinkage of the plastic part, which is caused by the molecular...
Date : 06/28/2022 | View : 981
-
What is beryllium copper used for?
First what’s the C17200 beryllium copper?
C17200 beryllium copper is known as Alloy 25 and is the most commonly utilized beryllium copper alloy and is notable for exhibiting the highest strength and hardness compared...
Date : 06/27/2022 | View : 1045
-
What molds have done to our lives？
What molds have done to our lives？
There may be many people who think injection mold is very strange, but if it comes to plastic products, they may comprehend this word more clearly. Plastic...
Date : 06/25/2022 | View : 1007
-
How much do you know about injection mold design?
Do you understand injection mold design?
The injection mold is determined by the characteristics of the raw material. One is the filling flow characteristics of the plastic melt during injection, and the other is the...
Date : 06/25/2022 | View : 1058
-
Inquiries of Sheet Metal Prototype from Clients
Acme Mold Ltd. is a professional sheet metal prototype manufacturer that can often complete your parts in the time with any thickness, any tolerance, any quantity. We produces precision sheet metal prototype to meet the strictest...
Date : 05/21/2019 | View : 2417
-
Rapid prototyping in automotive industry
Are you looking for some of the innovative ways to launch a new product in market or want to make some modifications in the existing one that is no longer able to keep pace with the latest trends?
The first this...
Date : 05/17/2019 | View : 2760
-
Quotes of sheet metal prototype from New Zealand
Recently, we got some quotes of sheet metal prototype from New Zealand clients, here are the details:
1. Hi, I am getting prices for 3 or 4 small prototypes I need from cut and bent sheet steel. I can send the cad if you can...
Date : 03/19/2019 | View : 2708
Displaying 21 to 30 (of 129 Information)
Why are there shrinkage marks on the surface of products During the production of injection molded products, some products will have uneven surface shrinkage due to uneven wall thickness, resulting in shrinkage marks. So what is a shrink mark? Shrinkage mark refers to the phenomenon... Date : 07/01/2022 | View : 985
What is anodized coating and its function? Fist what is anodized coating? As we all know anodizing is an electrochemical process that converts the metal surface into a decorative, durable, corrosion-resistant, anodic oxide finish. Aluminum is ideally... Date : 06/30/2022 | View : 1112
Injection mold design and manufacturing solutions The injection mold structure should be reasonably selected. According to the drawings and technical requirements of the plastic parts, research and select the appropriate molding methods and equipment, combine the mechanical... Date : 06/29/2022 | View : 1032
The reason and solutions of defective injection products -- warp 1. Unbalanced molecular orientation. The warping deformation of thermoplastics largely depends on the difference between the radial and tangential shrinkage of the plastic part, which is caused by the molecular... Date : 06/28/2022 | View : 981
What is beryllium copper used for? First what’s the C17200 beryllium copper? C17200 beryllium copper is known as Alloy 25 and is the most commonly utilized beryllium copper alloy and is notable for exhibiting the highest strength and hardness compared... Date : 06/27/2022 | View : 1045
What molds have done to our lives？ What molds have done to our lives？ There may be many people who think injection mold is very strange, but if it comes to plastic products, they may comprehend this word more clearly. Plastic... Date : 06/25/2022 | View : 1007.png)
How much do you know about injection mold design? Do you understand injection mold design? The injection mold is determined by the characteristics of the raw material. One is the filling flow characteristics of the plastic melt during injection, and the other is the... Date : 06/25/2022 | View : 1058
Inquiries of Sheet Metal Prototype from Clients Acme Mold Ltd. is a professional sheet metal prototype manufacturer that can often complete your parts in the time with any thickness, any tolerance, any quantity. We produces precision sheet metal prototype to meet the strictest... Date : 05/21/2019 | View : 2417
Rapid prototyping in automotive industry Are you looking for some of the innovative ways to launch a new product in market or want to make some modifications in the existing one that is no longer able to keep pace with the latest trends? The first this... Date : 05/17/2019 | View : 2760
Quotes of sheet metal prototype from New Zealand Recently, we got some quotes of sheet metal prototype from New Zealand clients, here are the details: 1. Hi, I am getting prices for 3 or 4 small prototypes I need from cut and bent sheet steel. I can send the cad if you can... Date : 03/19/2019 | View : 2708
